Information for the reviews is found on: http://cmsdoc.cern.ch/~wsmith/trigrev.html, including the milestones we will be required to report progress on.

We will also have a dedicated workshop on Saturday, Sept, 29 on how to organize the all of the trigger software. The eventual goal would be to have a system that downloads the FPGA's and programmable LUT's, runs checks on the JTAG, reads back everything to verify it is downloaded properly and then responds back to Run Control that the system is set up. Here there are interfaces to DAQ, Run Control and Slow Control. Next, these parameters and FPGA configurations should be derived from the ORCA simulation and also provide modules to the ORCA simulation and data reconstruction. Therefore, we have interfaces to the DAQ, PRS and CCS. Members of these groups are also encouraged to participate and to give talks. (We have room on the agenda, please contribute.)

** Please review the Agendae below and comment on or confirm (if you have not already done so) the talks scheduled. Additional contributions are welcomed!

** Please provide W. Smith with one or two summary transparencies of your subsystem that we can show at the reviews before Sept. 14. We will need to cover what we had planned to do in the past year, what we accomplished and what we plan to do in the next year.

Please provide copies to G. Wrochna for muon trigger items.

You may check updates of this information on: http://cmsdoc.cern.ch/~wsmith/Agenda0901.html

Annual Review of CMS Trigger, Monday, Sept. 24,  Bat. 40-5-A01
================================================

 8:30 -  9:10 Trigger CR rehearsal - W. Smith
 9:10 -  9:40 Discussion
 9:40 - 10:10 Cal. Trig - S. Dasu (incl. forward jet triggers)
10:10 - 10:30 BREAK
10:30 - 11:00 Muon Trig. - G. Wrochna (incl. RPC rates & new ASIC)
11:00 - 11:15 Global Trig. - C. Wulz (incl. Global Muon Trig)
11:15 - 11:30 Controls, Timing, Interfaces, Calibration - J. Varela
11:30 - 12:30 Discussion

CMS Trigger Meeting, Tuesday, Sept. 25,  Location TBA
==========================================

 9:00 - 12:00 Calorimeter & Global Trigger:
================================
 9:00 -  9:20 HCAL TPG - T. Grassi
 9:20 -  9:40 ECAL TPG ?????
 9:40 - 10:00 Regional Cal Trigger Status - S. Dasu
10:00 - 10:30 Cal Trigger Simulation & Descoping - P. Chumney
10:30 - 11:00 BREAK
11:00 - 11:20 Global Cal Trigger - G. Heath ?
11:20 - 11:40 TTC and TTS Interfaces -- J. Varela
11:40 - 12:00 Global Trigger - A. Taurok

14:00 - 17:30 Joint Muon/Trigger Meeting:
===============================
14:00 - 14:20 RPC Trigger Status - J. Krolikowski
14:20 - 14:40 Muon Trigger & RPC Noise - G. Wrochna
14:40 - 15:00 DT Trigger Server - A. Montanari
15:00 - 15:20 New CSC Trackfinder - D. Acosta
15:20 - 15:40 DT Trackfinder & Global Muon Trigger - A. Taurok
15:40 - 16:10 BREAK
16:10 - 16:30 Muon Trigger & Descoping - G. Wrochna
16:30 - 16:50 Effects of Endcap staging/descoping - D. Acosta
16:50 - 17:30 Discussion

CMS Trigger/Software Meeting, Saturday, Sept. 29, Location TBA
================================================
Talks thus far planned (schedule forthcoming):

FPGA Configuration/verification & System Control - D. Newbold
Software Requirements: Global Trigger & Global Muon Trigger - C. Wulz
CSC Trigger Software Plans & Experience - D. Acosta
Structure of the trigger control software - J. Varela
DCS overview and perspectives- W. Funk
DCS and configuration of VME front-ends - F. Glege
ECAL front-end software - N. Almeida
Run Control  - ???
XDAQ - ???

LHCC Comprehensive Review, TriDAS Session, Mon. Oct. 1 Bat. 40 S2-A01
=======================================================

13:30 - 14:10 Trigger - W. Smith
14:40 - 15:20 DAQ - S. Cittolin
16:00         End of Session

The semiannual TRiDAS review of the trigger will take place on
Tuesday, November 6, during the next CPT week.

Level 1 Trigger Home Page